Search results for "Simulation software"
showing 10 items of 28 documents
Validation of mathematical model for CZ process using small-scale laboratory crystal growth furnace
2018
The present material is focused on the modelling of small-scale laboratory NaCl-RbCl crystal growth furnace. First steps towards fully transient simulations are taken in the form of stationary simulations that deal with the optimization of material properties to match the model to experimental conditions. For this purpose, simulation software primarily used for the modelling of industrial-scale silicon crystal growth process was successfully applied. Finally, transient simulations of the crystal growth are presented, giving a sufficient agreement to experimental results.
Experimental and numerical investigation of laboratory crystal growth furnace for the development of model-based control of CZ process
2019
Abstract The presented study is focused on laboratory Czochralski crystal growth experiments and their mathematical modelling. The developed small-scale CZ crystal growth furnace is described as well as the involved automation systems: crystal radius detection by image recognition, temperature sensors, adjustable heater power and crystal pull rate. The CZ-Trans program is used to model the experimental results – transient, 2D axisymmetric simulation software primarily used for modelling of the industrial-scale silicon crystal growth process. Poor agreement with the experimental results is reached; however, the proven ability to perform affordable, small-scale experiments and successfully mo…
DRESS: A Distributed RMS Evaluation Simulation Software
2020
Distributed environments consist of a huge number of entities that cooperate to achieve complex goals. When interactions occur between unknown parties, intelligent techniques for estimating agent reputations are required. Reputation management systems (RMS's) allow agents to perform such estimation in a cooperative way. In particular, distributed RMS's exploit feedbacks provided after each interaction and allow prediction of future behaviors of agents. Such systems, in contrast to centralized RMSs, are sensitive to fake information injected by malicious users; thus, predicting the performance of a distributed RMS is a very challenging task. Although many existing works have addressed some c…
Explainable Post-Occupancy Evaluation Using a Humanoid Robot
2020
The paper proposes a new methodological approach for evaluating the comfort condition using the concept of explainable post occupancy to make the user aware of the environmental state in which (s)he works. Such an approach was implemented on a humanoid robot with social capabilities that aims to enforce human engagement to follow recommendations. The humanoid robot helps the user to position the sensors correctly to acquire environmental measures corresponding to the temperature, humidity, noise level, and illuminance. The distribution of the last parameter due to its high variability is also retrieved by the simulation software Dialux. Using the post occupancy evaluation method, the robot …
DSC: software tool for simulation-based design of control strategies applied to wastewater treatment plants.
2011
This paper presents a computer tool called DSC (Simulation based Controllers Design) that enables an easy design of control systems and strategies applied to wastewater treatment plants. Although the control systems are developed and evaluated by simulation, this tool aims to facilitate the direct implementation of the designed control system to the PC of the full-scale WWTP (wastewater treatment plants). The designed control system can be programmed in a dedicated control application and can be connected to either the simulation software or the SCADA of the plant. To this end, the developed DSC incorporates an OPC server (OLE for process control) which facilitates an open-standard communic…
H∞ static output-feedback control design with constrained information for offshore wind turbine system
2013
Abstract This paper deals with H ∞ static output-feedback control design with constrained information for offshore wind turbines. Constrained information indicates that a special zero–nonzero structure is imposed on the static output-feedback gain matrix. A practical use of such an approach is to design a decentralized controller for a wind turbine. This will also benefit the controller in such a way that it is more tolerant to sensor failure. Furthermore, the model under consideration is obtained by using the wind turbine simulation software FAST. Sufficient conditions to design an H ∞ controller are given in terms of Linear Matrix Inequalities ( LMI s ). Simulation results are given to il…
Wastewater treatment plant design and operation under multiple conflicting objective functions
2013
Wastewater treatment plant design and operation involve multiple objective functions, which are often in conflict with each other. Traditional optimization tools convert all objective functions to a single objective optimization problem (usually minimization of a total cost function by using weights for the objective functions), hiding the interdependencies between different objective functions. We present an interactive approach that is able to handle multiple objective functions simultaneously. As an illustration of our approach, we consider a case study of plant-wide operational optimization where we apply an interactive optimization tool. In this tool, a commercial wastewater treatment …
Reducing the noise pollution level along main roads in Sibiu, Romania by optimizing the traffic flow
2017
Noise pollution is one of the most important negative effects of road traffic, especially in cities. The current paper presents an attempt to reduce the noise level created by the road traffic along some main roads in the city of Sibiu, Romania by suggesting ways to optimize the traffic flow. The number of cars and the resulting noise levels were recorded in a key area of Sibiu. The noise levels were compared to standards and to measurements taken in areas with less traffic. Then, they were fed, together with road geometry data, into a specialized simulation software that allowed the computer-aided reproduction of the traffic flow, but also the modifying of conditions such as the road geome…
Analysis, Modeling and Simulation of Complex Regional Clusters Activities, Using Arena Simulation Software
2014
Process modelling is the concise description of the total variation in one quantity, y, by partitioning it into a deterministic component given by a mathematical function of one or more other quantities, x1, x2... plus a random component that follows a particular probability distribution. The models are material or immaterial systems, which represent other systems, so that it may be possible to manipulate the built structures and their states. The main elements of a simulation are: attributes (describe and differentiate entities), variables (system characteristics), resources (whose capacity can be variable), tails (seen in case of unavailability of resources) and statistical accumulators (…
Lighting control systems: Factors affecting energy savings' evaluation
2015
Abstract The use of automated lighting control systems allows to reduce lighting costs and to achieve significant energy savings. The energy performances of controls are affected by many factors, the impact of which is very difficult to account for during the design process. The goal of this paper is to describe the factors that influence the control systems’ energy performances, to analyze how the currently available calculation tools take them into account and finally to propose a simple method to adjust results obtained from the simulation software.